How fast hot tub heat up

Simply put, the warmer it is outside, the quicker your hot tub will heat up. If it is a warm, sunny day and you want your water temperature to reach degrees, it will most likely take approximately 4 hours. If some of these components are wearing out or damaged, it can take much longer to reach the temperature you desire. There are a few ways that you can help improve the efficiency of your hot tub which will not only speed up how fast the water will heat up but also reduce costs on your utility bill.

First and foremost, make sure that you have a quality, insulated cover that will trap heat inside the hot tub. If you need to purchase a cover, look for a lockable one with tapered edges that will keep as much heat inside as possible. If your existing cover has a hole, cracks or damage - heat is escaping which is costing you time and money. Something that most hot tub owners never think of when considering how long it will take to heat their hot tub is their landscaping.

There are ways that you can help reduce the pull of heat from your hot tub's water including surrounding with trees and shrubs or using a windshield or enclosure to prevent cooler air from reaching the water. Additionally, the temperature of the existing water in the tub or from the filling hose, as well as ambient air temperature will also affect heating time. Maintenance plays a role in hot tub heating times. Ensuring a hot tub is properly serviced and keeping the filters clean will help reduce the time it takes to heat up the water.

To minimize the heating time required for a hot tub, make sure all the jets are turned on and that the heater is sufficiently powerful. The existing heater can be replaced with a more powerful one if desired, in order to reduce the heating time. Another key way to reduce the heating time is to place a cover on the hot tub, which will help prevent heat escaping into the atmosphere.

There are a range of covers available, with some covering just the top and others covering the whole hot tub. Just make sure the cover fits well so that as little heat as possible can escape from the hot tub.

Make sure the hot tub is sufficiently sheltered from the elements too, as wind, snow and rain all play their part in cooling down the water temperature. You can purchase or create windbreaks to block wind, as well as utilize trees or fencing as a windbreak. Though the temptation may be strong to fill the hot tub with hot water, the recommended advice is to avoid doing this. If it's the first time turning your unit on it can take upwards of 24 to 48 hours before your hot tub reaches an optimal temperature.

Depending on the size of your hot tub and the efficiency of your spa heater, you can generally raise the temperature about 5 or 6 degrees per hour. In fact, it can take anywhere from one to two days before your average-size hot tub is hot enough for use. Some are even left to believe that they receive a defective unit and hurriedly begin calling their spa dealer to rectify what they believe is a serious issue. While technologies and modern appliances have certainly changed, heat is still heat and water is still water.

Also, many people assume that since water is such an excellent conductor of electricity then it should also heat easily as well. But, these are actually two separate phenomena. Just think of how long it takes to heat up a gallon pot of water on the stove top and then multiply that figure by several thousand and you will soon realize why it takes so long for water to heat.

Liquids such as water also heat differently than solids.